How do I replace or service the diverter valve on a bath shower mixer?
The diverter controls whether water flows to the spout or the shower handset. Blockages or seal wear can stop it from switching correctly. If you are experiencing water flowing from both the spout and handset, the diverter stuck between positions, or reduced pressure from either outlet, the following steps can help to resolve this issue:
- Turn off the water supply.
- Remove the diverter knob or lever.
- Unscrew and remove the diverter cartridge or spindle assembly.
- Clean internal components and lubricate with silicone grease.
- Replace worn parts or install a new diverter.
- Reassemble and test the water flow direction.
Tip:
For maintenance instructions specific to your model, please refer to the diverter section of the instruction manual.
Replacement diverters are available from our spares website